AK1450 PERFORATED BOTTOM SEALED SHAFTLESS BAG ON ROLL MAKING MACHINE (SEMI -AUTOMATIC) |
This machine is suitable for making heavy duty bags from roll to roll with LLDPE, LDPE, MLDPE, HDPE, EVA, CPP, OPP, PP, PE and PA materials. * |
Thickness of the film can be welded:
Minimum 50 microns (2×20- Double layers Tubular form), Maximum 1000 microns (2×500-Tubular form or 4×250-Gusseted tubing form) * |
The length of the film can be processed:
Minimum 5cm (50mm) Maximum 9999,9cm(999999mm) |
PLC controlled operation control panel |
TFT screen with touchpad |
Single unwinder |
Cardboard bobbin winding system |
Three independent rezistance wires(heater) can use independently for making a weld and controlled by digital impulse control system
1. heater – 2. heater – 3. heater 1. and 2. heaters 1. and 3. heaters 2. and 3. heaters |
Only Perforation is possible without welding |
Only Transfering is possible without measurement |
Maximum 1000 mm diameter of bobbin can be loaded on unwinder |
Maximum 500 mm diameter of bobbin can be loaded on winder bobbin |
Edge control system |
Optionally; Color photocell can be affixed for printed products |
Servo motor speed control drivers |
Output digital counter (mm measurement) |
Alarm for resistance wire breake |
Emergency auto-stop system with reflective photocell |
Optionally; Static electricity receiver bar |
Automatic bobbin loading system for unwinder. |
Banana Rollers For Properly Wrapping. |
Automatic winding system for winder |
Air blowing system for jaw. |
Power Consumption; During working time it is between 2,0 – 2,5 kW |
Total power; 3P 380V+N+MP, 11,85 kW, 50Hz |
Total air supply; 8-10 bar |
* Welding quality and production speed can be changeable depending on the micron thickness of the product and the quality of the material to be processed.