AK1750 PERFORATED AND SINGLE CUTTING ROLL BAG MACHINE
( AUTOMATIC LOADING SYSTEM ) |
This machine is suitable for making LLDPE, LDPE, MLDPE, HDPE, EVA, CPP, OPP, PP, PE and PA materials with a single button command with dual function feature to make roll-to-roll or individual bulk bags. * |
Thickness of the film can be welded:
Minimum 50 microns (2×20- Double layers Tubular form), Maximum 1000 microns (2×500-Tubular form or 4×250-Gusseted tubing form) * |
The length of the film can be processed:
Minimum 5cm (50mm) Maximum 9999,9cm(999999mm) |
PLC controlled operation control panel |
TFT screen with touchpad |
Single unwinder , Double winder |
Holders of bobbin with pneumatic shaft |
Three separate resistance wires (heater) can be controlled independently by roll-to-roll bags for welding and four different resistance wires (heater) are used by means of a digital impulse system for bulk bags.
1. heater – 2. heater – 3. heater – 4. heater 1. and 2. heaters 1. and 3. heaters 2. and 3. heaters 3. and 4. heaters |
Only Perforation is possible without welding |
Only Transfering is possible without measurement |
Only cutting is possible without welding |
Maximum 950 mm diameter of bobbin can be loaded on unwinder shaft |
Maximum 600 mm diameter of bobbin can be loaded on winder shafts |
Maximum 250 kg. of bobbin can be loaded on unwinder and winder shafts |
Diameter(outside) of shaft(winder/unwinder); 70mm ” it is for 76mm (inner diameter) of carton bobbin” |
A.C. motor speed control drivers |
Output digital counter (mm measurement) |
Alarm for resistance wire breake |
Emergency auto-stop system with reflective photocell |
Optionally; Color photocell can be affixed for printed products |
Optionally; Static electricity receiver bar |
Banana Rollers For Properly Wrapping. |
Air blowing system for jaw. |
Power Consumption; During working time it is between 1,0- 2,5kW |
Total power; 3P 380V+N+MP, 8,80 kW, 50Hz |
Total air supply; 8 – 10 bar |
It is possible to produce one side open bag on two separate bobbin with cold slicing knife |
Shaft safety chucks |
Bobbin loading system for unwinder. |
*Welding quality and production speed can be changeable depending on the micron thickness of the product and the quality of the material to be processed.
MODEL | AK1750 – 100 | AK1750 – 125 | AK1750 – 150 | AK1750 – 175 | AK1750 – 200 | AK1750 – 220 | AK1750 – 240 | AK1750 – 260 |
Working
Width |
Maximum 950mm | Maximum 1200mm | Maximum 1450mm | Maximum 1700mm | Maximum 1950mm | Maximum 2150mm | Maximum 2350mm | Maximum 2550mm |
Machine Width |
2270 mm | 2270 mm | 2270 mm | 2270 mm | 2270 mm | 2270 mm | 2270 mm | 2270 mm |
Machine
Length |
1880 mm | 2130 mm | 2380 mm | 2630 mm | 2880 mm | 3080 mm | 3280 mm | 3480 mm |
Machine
Height |
1520 mm | 1520 mm | 1520 mm | 1520 mm | 1520 mm | 1520 mm | 1520 mm | 1520 mm |
Machine
Weight |
1325 kg | 1450 kg | 1575 kg | 1700 kg | 1825 kg | 1950 kg | 2075 kg | 2200 kg |
Production Speed (pieces/minute) * |
For 1000 mm bag lenght 14 – 17 pcs / min. ( Depends on thickness and quality of film ) | |||||||
For 1500 mm bag lenght 12 – 15 pcs / min. ( Depends on thickness and quality of film ) | ||||||||
For 2000 mm bag lenght 11 – 14 pcs / min. ( Depends on thickness and quality of film ) | ||||||||
For 2500 mm bag lenght 10 – 13 pcs / min. ( Depends on thickness and quality of film ) | ||||||||
For 3000 mm bag lenght 9 – 12 pcs / min. ( Depends on thickness and quality of film ) |