AK2020 SPRING UNIT ROLL PACK MACHINE
( AUTOMATIC ) |
This machine is used to reduce storage and transportation costs by wrapping spring carcasses in roll form. It also eliminates the risk of springs collapsing during use. |
PLC controlled operation control panel |
TFT screen with touchpad |
Drive speed adjustment control |
Coating material feeding unit coil holders with air shaft ( Ø 76,2 mm / 3” ) |
Ability to adjust pressure according to the feature of the spring to be wound |
Spring carcasses that can be wrapped (Bonel, Torba standard spring carcasses) |
Bonel spring carcass with a maximum height of 180 mm can be wrapped |
Pocket spring carcass with a maximum height of 230 mm can be wrapped |
Ability to attach coating material rolls with a maximum diameter of Ø 100 cm |
The recommended roll diameter for winding is 500 mm. |
The maximum roll diameter that can be wrapped is 650 mm. |
A.C. motor speed control drivers |
Output digital counter |
A maximum of 24 rolls can be wrapped in one hour. (For example; Ability to wind 24 coils per hour in 5-piece windings for pocket springs) – (These quantities may vary depending on the types and quantities of springs of various sizes to be wound.) |
2 rolls of the same or different sizes can be attached to the coating material feeding unit.
(Optional feeding unit can be increased optionally) |
Automatic attachment of the coating material to the winder roller |
Automatic cutting and hotmelt gluing system at the end of wrapping the coating material |
Automatic feeding unit for spring carcasses |
Determining and counting the number of spring carcasses to be wrapped |
Ability to align spring carcass feeding unit |
Spring mat feeding range signaling system |
Warning system when the desired quantity is completed |
Automatic stop system at the end of coating material |
Optional wrapped roll lifting and stretching system |
Optional barcode reader system
(Handheld and capable of reading a maximum of 10 number characters) |
Optional safety light curtain barriers |
Total air requirement; 6 – 8 bars |
Total power; 3P 400V+N+MP, 20.65 kW, 50Hz |
MODEL | AK2020 | ||||||||||||||||||||
Body Unit | Product Feeding Unit | Coating Material Unit | Wrapped Roll Removal and Stretch Unit (Optional) | ||||||||||||||||||
Machine Width | 4000 mm | 2100 mm | 1550 mm | 750 mm | |||||||||||||||||
Machine Length | 1950 mm | 4100 mm | 2350 mm | 1300 mm | |||||||||||||||||
Machine Height | 2300 mm | 1400 mm | 1350 mm | 500 mm | |||||||||||||||||
Machine Weight | 4000 kg | 1750 kg | 500 kg | 750 kg |